1   Heavy duty channel chassis provides durability and stronger support in the areas where you need it.

2  New dumping mechanism enable the mixer comes out standard with a multi-positioned drum lock of easy cleaning, flexibility and greater capacity.

3    Pneumatic wheels and towing bar are easy for moving from site to site.

During mixing, it is very important to tilt the drum. And the raw material feeding process is suggested as follows:

Put in the water and sand first to clean off the remains of the last mix. Add the cement and turn the drum about 4 turns. The water/sand/cement mixture should be smooth and flowing evenly. Turn the drum until the color of the mix is even.

Put in the stone and turn the drum about 8 turns. Don’t go too fast, let the mix fall through the mixing arms. Going fast does not make a better mix. The drum axis usually stays at an angle of about 15 degrees from horizontal during mixing.